High Density Fiber Optic Patch Panel Rack Mount
Description
* The proper sealing for dust protection structure
* The splicing storage is the cassette organizer system
* The drawer is slide out for splicing or removable for initial pigtail installation.
* Enough space to coil up excess length of cables.
Model
PP-SW-96-2U/144-4U
Type
19inch Rock Mount
Material
1.2mm CRS(Cold Rolled Steel)
Size W*D*H (mm)
430*360*85mm-2U
430*360*170mm-4U
Max capacity
(core)
96~144
Included
accessories
4pcs cable fix accessories, heat shrink tubes, cable ties, number
tapes, adapter screws
Product color
Black
Working
temperature
-40~+85°C
Storage
temperature
-40~+85°CRack mount patch panel is mainly used for connection and storage between optical fiber
cable and pigtail in equipment. The box body is made of high quality cold rolled
steel,electrostatic spraying, the appearance is beautiful, and the operation is convenient.
Standard: 19" rack mount dimension.
Cable entrance: 4 ports, ⌀ 25mm.
With cable lead-in, fixation and protection devices.
There is enough room for fiber storage, ensure the bending radius is 15 times diameter of
the cable.
Providing relevant accessories
High quality cold rolled sheet forming, electrostatic powder spraying technology, smooth
surface, not east to rust.
High strength sheet metal, long-term using is not easy to deformation.
The edges of metal parts are designed with rounded corners to avoid damage to cables.
The bottom plate is designed with sliding design, for the patch panel already installed on
the cabinet, the wiring can be adjusted without removing the patch panel.
Optical properties
The remaining optical fiber in the optical cable terminal box is coiled in the collecting disk, and the optical
fiber and optical fiber connector should be attenuated after the installation and operation of the optical
cable terminal box.
After the following tests, the mechanical properties of the optical cable terminal box and all parts of the
box should be changed, if necessary, optical fiber inspection.
1. tensile: the cable terminal box and an optical cable shall be able to withstand an axial tensile force of
not less than 500 N, and an axial tensile force of not less than 5 N between the cable terminal box and any
cable tail fiber. 2. flattening: all sides of the cable terminal box should be able to withstand vertical static
pressure of not less than 200 N. 3. twist: Cable terminal box should withstand torsion angleElectrical performance
1. insulation resistance: the insulation resistance between the cable connector box metal member and
the cable metal reinforcement core, between the cable metal member, and between the cable metal
member and the ground shall be not less than 2*104 MΩ[ and the test voltage shall be 500 V (DC)]. 2.
Voltage Resistant Strength: Between the cable terminal box and the cable metal reinforcement core,
between the cable metal member, between the cable metal member and the ground under 15 Kv DC 1
min, no breakdown, no arc
Material properties
The materials used in the parts where the cable terminal box is located should have anticorrosive
properties, such as no anticorrosive properties should be treated with anticorrosion; its physical and
chemical properties must be stable; all kinds of materials must be compatible with the cable sheath and
the wiring tail fiber sheath. To prevent corrosion and other electrical damage, these materials must also
be compatible with materials commonly used in other equipment.
The combustion performance of the 1. optical cable terminal box should meet the requirement of 30 s
duration of the test flame applied A, the test in the GB/T5169.7.
The hot melt temperature of the materials and fillers used in the reinforced protective parts of 2. optical
fiber joints should not be less than 120℃, the thermal softening temperature should not be less than 90℃,
and should be able to be used at a temperature of 25℃~40.
Appearance optical cable terminal box should be complete shape without bubbles, no cracks and voids,
warpage, impurities and other defects. All background colors should be uniform and continuous. The
beautiful appearance construction is convenient to continue the additional decay small structure is
reasonable, can fix the optical cable strengthening core in the terminal box, has the function of drawing
out the ground wire connected with the optical cable metal outer sheath, and is suitable for the belt
optical cable and the ordinary optical cable at the same time. Unique design, with 19 inch rack on the
terminal box, but also wall-mounted terminal box.
|
|
High density distribution frame Images
|
